Skip to content
Residential ironwork

Wrought iron fences

Wrought iron fencing defines property lines, adds security, and gives homes and businesses a classic look that holds up for decades. We fabricate custom iron fence panels and posts and install them to fit your property's exact dimensions.

What's included

  • Site survey and layout planning
  • Custom panel and post fabrication
  • Post setting in concrete footings
  • Panel and gate installation
  • Powder-coat finish for rust protection
  • Gate hardware and hardware adjustment

Typical price

4 ft steel picket fenceper linear foot, installed$55–$80
6 ft or ornamental fenceper linear foot, installed$70–$100

Ballpark installed prices for 2026, for planning only. We confirm the exact price in a written quote after we measure.

Get your price

About wrought iron fences

Iron fences in Massachusetts usually do one of three jobs: a decorative front-yard fence that frames the house without blocking the view, a perimeter or security fence along a yard or property line, or an enclosure around a pool or garden. Common styles include flat-top and spear-top picket fences, finial designs that suit older homes, and simpler modern flat-bar fences. Most residential iron fences run between three and six feet tall.

A fence job is mostly ground work. Our crew lays out the line, sets each post in a concrete footing below the frost line, and keeps every post plumb so the panels hang true. Panels are typically fabricated and finished to the measured post spacing, then mounted on site. On sloped yards, panels are either stepped or racked to follow the grade, which changes fabrication and should be settled before the quote.

Underground utilities have to be marked before anyone digs. In Massachusetts that means a call to Dig Safe (811), which a reputable pro handles as a matter of course. If you know where your property line is, a survey or plot plan helps us lay out the fence in the right place.

How the project works

  1. Share the project

    Send the approximate run length, the height and style you want, any gates, and a few photos. We review it and set up a site visit.

  2. Site survey and quote

    Our crew walks the line, checks grade changes, soil, ledge, and obstacles, asks where your property line is, and quotes the job in writing.

  3. Permits and Dig Safe

    Our team checks your town's fence rules, pulls a permit if one is required, and calls Dig Safe so utilities are marked before digging.

  4. Fabrication and finish

    Panels, posts, and gates are fabricated to the site measurements and finished, usually galvanized, powder-coated, or both.

  5. Install

    Posts are set in concrete footings below the frost line and braced while they cure; panels and gates are mounted, and gate hardware is adjusted so it swings and latches cleanly.

Materials and finishes

Steel picket fencing

Most new fences sold as wrought iron are welded mild steel. It is strong, takes custom designs, and is hard to pry apart or climb through. It needs a good finish to stand up to road salt and coastal air.

Galvanizing plus powder coat

The common two-layer approach for exterior fencing: zinc protects the steel, including the inside of tube posts and pickets, and powder coat adds color and a second barrier. It is the most durable option for fences that sit in snowbanks and plow spray.

Aluminum fencing

Aluminum fence systems don't rust, weigh less, and suit long runs and pool enclosures. They're less rigid than steel and can bend if hit by a plow or a car, and styles mostly come from manufacturer lines rather than fully custom designs.

Restoring an existing iron fence

Original iron fences on older homes can often be repaired, blasted, and refinished instead of replaced. Our team can tell you whether the posts and rails are sound enough to save.

Massachusetts code and permits

There is no single statewide fence permit in Massachusetts. Height limits, setbacks from the property line, and whether a permit is needed at all are set by each town's zoning bylaws and building department, and historic districts or HOAs can add their own rules. A fence that serves as a pool barrier is a separate case: the state building code sets barrier requirements for pools, including minimum height and self-closing, self-latching gates, and the building department inspects it. Your local building department has the final say, so confirm the rules for your property before anything is fabricated.

What affects the price

  • Total linear footage and fence height
  • Number of corners, ends, and grade changes (stepped or racked panels)
  • Picket style and decorative details like finials, scrolls, or rings
  • Number and type of gates, and whether any are automated
  • Finish: powder coat vs. hot-dip galvanizing plus powder coat
  • Ground conditions such as ledge, roots, or tight access for digging footings
  • Removal of an existing fence

Common questions

How is wrought iron fencing priced?
Fencing is priced by linear footage, height, and design complexity. Corners, gates, and decorative elements add to the scope. Share your property dimensions and we'll get you a written quote.
Do you install fence gates too?
Yes — we fabricate and install matching gates in single or double configurations, with manual or automatic hardware options.
How do I maintain a wrought iron fence?
Powder-coated iron fences need minimal maintenance — wipe down periodically and touch up any chips promptly to prevent rust. Our team can re-coat sections if needed.
Do you need a permit for a fence in Massachusetts?
It depends on your town. There is no statewide fence permit; height limits, setbacks, and permit requirements are set locally, and a fence that serves as a pool barrier has its own rules. Our team checks your town's requirements during the site visit.
How deep do fence posts need to be in Massachusetts?
Deep enough that each footing sits below the local frost line, which your town's building department can confirm. Shallow footings are the main reason iron fences heave and lean after a few winters. Gate posts usually get larger, deeper footings because they carry the gate's swinging weight.
Wrought iron vs aluminum fence — which is better for New England winters?
It depends on what the fence has to do. Galvanized, powder-coated steel is stronger and more rigid, which matters for security and for fences along driveways where plows push snow. Aluminum won't rust and needs less upkeep, which makes it a good fit for pool enclosures and long decorative runs. Either can last decades when the posts are set below the frost line.
Can an iron fence be installed on a sloped yard?
Yes. Panels are either stepped, so each section stays level and drops down the hill, or racked, so the rails follow the slope. Our team recommends one based on how steep the grade is and the look you want.
How long does a wrought iron fence installation take?
The install itself usually takes a few days once the fence is fabricated. From quote to finished fence is typically a few weeks, depending on fabrication lead time, permits, Dig Safe marking, and weather.