Skip to content
Residential ironwork

Stair railings

Interior and exterior stair railings are among the most common ironwork projects for Massachusetts homes. We fabricate and install custom iron and steel stair railings that meet code, fit your staircase dimensions, and complement your home's look.

What's included

  • Staircase measurement and design
  • Custom railing fabrication
  • Removal of old railings
  • Wall or floor mounting with secure anchors
  • Baluster and newel post installation
  • Powder-coat or paint finish

Typical price

Stair railingper linear foot, installed$70–$165
Full staircase, about 25 ft of railtypical project$1,800–$5,000

Ballpark installed prices for 2026, for planning only. We confirm the exact price in a written quote after we measure.

Get your price

About stair railings

Stair railing projects cover two different jobs. Interior railings replace or upgrade the railing on a main staircase, basement stairs, or loft, usually iron balusters with a wood or iron handrail. Exterior railings run along front steps, porch stairs, and deck stairs, where the railing has to survive weather and anchor into concrete, masonry, or framing. Many Massachusetts homes need both.

Popular interior styles include simple square or round balusters under a painted or stained wood handrail, modern horizontal bars, and traditional twists, baskets, and scrolls. A common upgrade is swapping wood balusters for iron while keeping the existing handrail and newel posts. Exterior stair railings are usually all metal and are often styled to go with a porch railing or fence.

Stairs are harder than flat runs. The railing follows the stair pitch, changes direction at landings, and has to hit handrail and guard heights along the whole run. Our crew measures each flight and fabricates to it, so the railing fits the stair rather than being cut down from a kit.

How the project works

  1. Share the project

    Send photos, the number of steps, and whether the stairs are inside or outside. We review it and set up a site visit.

  2. Measure

    Our crew measures rise, run, pitch, landings, and existing mounting points, and checks what the posts will anchor into.

  3. Design

    You choose the baluster style, handrail profile, and finish; we confirm the design meets height, spacing, and graspability requirements.

  4. Fabrication

    Exterior railings are typically welded in sections and finished before install day; an interior baluster swap may be done mostly on site.

  5. Install and inspection

    The old railing comes out, posts are anchored into framing, concrete, or masonry, and the finished railing is checked for height, spacing, and rigidity. Permitted work gets a final inspection.

Materials and finishes

Iron balusters with a wood handrail

The most common interior choice. The iron gives the look, and the wood handrail is warm to the touch and easy to grip. It works well when you want to keep your existing newels and handrail.

All-steel railing

Welded steel handrail, posts, and balusters in one rigid assembly. Standard for exterior stairs and modern interiors, with a round or other graspable handrail profile.

Galvanized and powder-coated steel

The durable finish for exterior stair railings, where the post bases sit in snowmelt and salt. Interior railings usually only need powder coat or paint.

Aluminum

A rust-free option for exterior steps that needs little upkeep. It's lighter and less rigid than steel, and it has to meet the same handrail and guard rules.

Massachusetts code and permits

New and replacement stair railings in Massachusetts are built to 780 CMR, the state building code, which follows the IRC for one- and two-family homes and the IBC for other buildings. Stairs with four or more risers need a handrail on at least one side, 34 to 38 inches above the stair nosing, with a graspable profile. Where the side of a stair or landing is open and more than 30 inches above the floor or grade below, it also needs a guard: at least 36 inches at landings on residential work and 42 inches in most commercial and multi-family settings, with openings that stop a 4-inch sphere. Existing railings may be grandfathered under the State Sanitary Code, but a replacement has to meet the current building code. Your local building department has the final say.

What affects the price

  • Number of steps, flights, and landings
  • Interior vs. exterior, and the finish each one needs
  • Baluster style: plain pickets vs. twists, baskets, or scrolls
  • Handrail material: wood, steel, or matching an existing rail
  • What the posts anchor into, and whether blocking or concrete repair is needed
  • Removal of the existing railing
  • Permit and inspection requirements in your town

Common questions

Do stair railings need to meet building code?
Yes — Massachusetts code specifies minimum height, maximum baluster spacing, and graspability requirements for stair railings. We size and install to meet these requirements.
Can you replace just part of a railing?
Sometimes — it depends on the existing railing's condition and style. Our team will assess whether a section replacement or full replacement makes more sense during the site visit.
Do you work in occupied homes?
Yes — most interior railing work is done in occupied homes. We work cleanly and minimize disruption.
What's the difference between interior and exterior stair railings?
Exterior railings need weather-resistant finishes and secure masonry anchoring. Interior railings focus more on aesthetics and handrail comfort, with wall or floor mounting. Our team handles both.
How high should a stair handrail be in Massachusetts?
Between 34 and 38 inches, measured straight up from the nosing of each tread, on new or replacement work. A handrail is required on stairs with four or more risers, and it has to be graspable, typically a round profile roughly 1¼ to 2 inches across or an equivalent shape.
Can I replace wood balusters with iron and keep my handrail?
Usually, yes. If the existing handrail and newel posts are solid, our crew can remove the wood balusters and install iron ones in the same rail, keeping spacing within the 4-inch-sphere rule. A loose or damaged handrail is usually better replaced at the same time.
Do I need a permit to replace a stair railing in Massachusetts?
Often, yes. Replacing a railing is typically permitted work under 780 CMR, with a final inspection, though requirements vary by town and scope. Our team confirms with your local building department and typically handles the permit.
Why do exterior stair railings get loose?
Mostly because of how the posts were anchored. Posts surface-bolted into thin or cracked concrete, or into rotted wood, work loose as freeze-thaw cycles move the material around them. Core-drilling into sound concrete, setting posts below the frost line, or bolting through to solid framing keeps a railing tight for years.